? epcos ag 2012. reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos prior express consent is prohibited. saw components saw resonator short range devices series/type: ordering code: r959 b39122-r 959-h110 date: version: december 20, 2012 2.4
2 december 20, 2012 r959 1176.00 mhz please read cautions and warnings and important notes at the end of this document. saw components saw resonator data sheet application n 1-port resonator n provides reliable, fundamental mode, quartz frequency stabilization i.e. in transmitters or local oscillators features n package size 3.0 x 3.0 x 1.0 mm 3 n package code dcc6e n rohs compatible n approximate weight 0.037 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n lead free soldering compatible with j - std20c n passivation layer elpas n aec-q200 qualified component family n e lectrostatic s ensitive d evice ( esd ) pin configuration n 2 input n 5 output, grounded in 1-port conf. n 1,4 to be grounded n 3,6 ground (case) r1 l1 c0 c1 2 5
3 december 20, 2012 r959 1176.00 mhz saw components saw resonator data sheet please read cautions and warnings and important notes at the end of this document. characteristics reference temperature: t a = 25 ?c terminating source impedance: z s = 50 w terminating load impedance: z l = 50 w min. typ. max. center frequency 1) 1) center frequency is defined as maximum of the real part of the admittance. f c 1175.70 1176.00 1176.30 mhz minimum insertion attenuation a min 1.3 1.7 db unloaded quality factor q u 3600 5500 ageing of f c C50/+50 ppm equivalent circuit elements motional capacitance c 1 1.541 ff motional inductance l 1 11.89 m h motional resistance r 1 1624 w parallel capacitance 2) 2) if used in two port configuration (pin 2 - input, pin 5 - output) c 0 is reduced by approx. 0.3 pf. c 0 1.8 pf temperature coefficient of frequency 3) 3) temperature dependence of f c : f c (t a ) = f c (t 0 ) (1 + tc f (t a C t 0 ) 2 ) tc f C0.032 ppm/k 2 turnover temperature t 0 1030?c maximum ratings operable temperature range t C40/+125 ?c storage temperature range t stg C40/+125 ?c dc voltage v dc 12 v source power p s 0 dbm
4 december 20, 2012 r959 1176.00 mhz please read cautions and warnings and important notes at the end of this document. saw components saw resonator data sheet references type r959 ordering code b39122-r 959-h110 marking and package c61157-a7-a143 packaging f61074-v8228-z000 date codes l_1126 soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2012. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
5 december 20, 2012 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
